|
Home > Products > Fine Cut Rotary Mowers > AR-5™ |
|
 |
 |
 |
 |
 |
AR-5™ - Limited Availablity
- Traction Control, On Demand - Increase traction by engaging weight transfer of decks to drive tires.
- Convertible 22" Envirodecks - Excellent mulcher with ability to discharge when conditions require; Conversion requires less than 5 minutes per deck.
- 60-hp Kubota® Turbo - Reliable power with plenty of horsepower.
- Parallel Series Traction - Improved turning geometry and great hill-climbing ability.
- Improved Lift Arm Design and Caster Design - Provides excellent range of motion to follow undulating terrain; Five independent cutting decks with improved lift arm and caster design.
- New TrimTek™ Decks -Call your dealer to order your TrimTek Decks Retro fit kit. Available soon!
|
 |
 |
|
|
|
| AR-5™ |
| Engine |
Kubota® V2003T, 4-cylinder, liquid-cooled turbo-charged diesel |
| Displacement |
112 cu. in. (1,835 cc) |
| Horsepower |
60 hp (44.7 kW) |
| Air Cleaner |
2-stage, Donaldson dry cartridge type with evacuator valve and service indicator |
| Cooling |
Side-by-side radiator/hydraulic oil cooler; pressurized; 8 qt. (7.6 L) capacity |
| Lubrication |
Fully pressurized with remote engine oil cooler |
| Oil Filter |
Full flow, replaceable spin-on remote type |
| Electrical System |
12V input/output controller; 40-amp alternator |
| Fuel Capacity |
17 gal. (65 L) |
|
|
|
 |
|
|
| traction & drive |
| Traction System |
Parallel-series full-time four-wheel drive; variable-displacement,
servo-controlled drive;
four high-torque wheel motors |
| Deck/Reel Drive |
2-section pump and direct-cooled deck motors |
| Hydraulic System |
14 gal. (53 L) capacity; hydraulic oil monitor and horn alarm; GreensCare biodegradable fluid; full-flow, 22-micron filter |
| |
| |
| TIRES, brakes & steering |
| TIRES |
|
| Front |
Two 26.5 x 14-12, 6-ply, turf tread |
| Rear |
Two 22.5 x 10-8, 4-ply, turf tread |
| Service Brakes |
Dynamic braking through traction circuit |
| Parking Brakes |
Foot-operated disc brakes |
| Steering |
Hydrostatic power steering with tilt wheel |
| |
| |
| SPEED |
| Transport |
0 - 10 mph (0 - 16 km/h) |
| Mow |
0 - 7 mph (0 - 11 km/h) |
| Reverse |
0 - 3.5 mph (0 - 6 km/h) |
| |
| |
| weight & DIMENSIONS |
| Weight |
3,951 lbs. (1,792 kg) |
| Length |
130 in. (3.3 m) |
| Height (without O.P.S.) |
56 in. (1.42 m) |
| Wheelbase |
58 in. (1.5 m) |
| Width |
98 in. (2.4 m) |
NOTE: Specifications, while correct at time of printing, may change
without notice. This product has been tested and complies with B71.4
-2004 ANSI voluntary safety specifications for commercial turf
equipment and also complies with EU safety regulations. |
|
|
|
|
 |
|
| Number and size |
Five 22 in. (55.88 cm) rotary cutting decks |
| Construction |
7-gauge heavy-duty welded with pressed steel |
| Caster wheels |
6.25 x 3.25-4 with taper roll bearing |
| Cutting unit lift |
Cross-cut lift position |
| Weight transfer |
Hydraulically from decks to tractor |
| Number of blades |
Five 22.375 in. (56.8 cm) heat treated alloy blades |
| Blade material |
Hardened, carbon steel alloy |
| Motor/spindle |
Fixed displacement, self-lubricating w/1.0 in. (2.54 cm) diameter shaft; double-sealed bearings |
| Height-of-cut |
0.75 in. - 5.25 in. (19 - 133 mm) in 0.25 in. (6 mm) increments |
| Cutting capacity |
6.8 acres/hr. at 7.5 mph (2.8 ha/h at 12 km/h) |
| Overall cutting width |
90 in. (2.3 m) |
|
|
 |
|
|
