|
Home > Products > Fairway
Mowers > SLF-1880™ |
|
 |
 |
 |
 |
 |
 |
SLF-1880™
- Lightweight Design -
More than 10% lighter than competitors; Little or no turf
compaction.
- 80" Width of Cut - Improved productivity over Triplex mowers.
- 18" Jacobsen Classic Cut Reels - Deliver the highest quality of cut compared to any other available reels; Smaller reel better follows ground contours without scalping.
- Choice of 26-hp Diesel or 33-hp Turbo Diesel Engine - More power delivered per inch of cut than competition.
- Patented Lift Mechanism - Allows reels to follow undulating terrain and deliver a superior cut.
|
 |
 |
|
|
|
|
| SLF-1880™ |
| Engine |
Kubota® D1105E 3-cylinder, liquid-cooled diesel rated at 26 hp; pressurized, sealed cooling system; dry-type air filter with service indicator; 40-amp alternator |
| Turbo |
Kubota® 33-hp turbocharged diesel engine |
| Fuel System |
12 gal. (45.42 L) capacity |
|
|
|
 |
|
|
|
| VEHICLE |
| Traction Drive |
Variable-displacement, hydrostatic pump with 2 high-torque wheel motors; 4-wheel-drive model available |
| |
| Travel Speed |
| Forward |
0 - 10.5 mph (0 - 16.9 km/h) - 2-Wheel Drive |
| Forward |
0 - 6 mph (0 - 9.6 km/h) - 4-Wheel Drive |
| Reverse |
0 - 4 mph (0 - 6.4 km/h) |
| Mow Speed |
0 - 6 mph (9.6 km/h) - 2 and 4-Wheel Drive |
| |
| Reel Drive |
Tandem gear pump with 2 solenoid-controlled spool-type valves; gear-type hydraulic motors mounted on each reel; pressure-compensated backlapping standard |
| Steering |
Rear-wheel, hydrostatic power steering |
| Lift System |
Electro-hydraulic system with double-acting cylinders; lift to cross-cut position only; one touch-lift/lower joystick |
| Hydraulic System |
8 gal. (30.28 L) capacity; Greens Care biodegradable hydraulic fluid; oil monitor with low-oil audible alarm standard |
| |
| Tires |
| Front |
24 x 13-12 tubeless tires (with special rounded shoulders) |
| Rear |
18 x 9.5-8 tubeless rib-tread |
| |
| Brakes |
| Service |
Dynamic braking through traction system |
| Parking |
(2) front disc |
| |
| Frame |
Welded, tubular construction, utilizing Turfcat® 500 chassis |
| Styling |
Jacobsen "family appearance," utilizing a common operator's station |
| Seat |
High-back, standard suspension seat with armrests |
| Headlights |
(2) standard |
| Mower Weight Transfer |
Spring-biased to rear roller |
| |
| |
| DIMENSIONS |
| Overall Length |
94 in. (2.39 m) with catchers off |
| Overall Height |
Approximately 56 in. (1.42 m) to top of steering wheel |
| Width - Mowing |
88 in. (2.23 m) |
| Width - Transport |
88 in. (2.23 m) |
| Weight - 2-Wheel Drive |
2,115 lbs. (less operator), with minimum fuel in tank and mowers raised |
| Weight - 4-Wheel Drive |
2,200 lbs. (less operator), with minimum fuel in tank and mowers raised |
| |
|
NOTE: Specifications, while correct at time of printing, may change
without notice. This Product has been tested and complies with B71.4 -2004 ANSI voluntary safety specifications for commercial turf equipment and also complies with EU safety regulations. |
|
|
|
|
 |
|
|
| Number |
5 |
| Width |
18 in. (45.72 cm) |
| Overall Cutting Width |
Approximately 80 in. (2.03 m) |
| Reel Diameter |
5 in. (12.7 cm) |
| Height-of-Cut Range |
0.30 - 0.70 in. (up to 0.937 in. with Hi-Cut kit), using low-profile, heavy bedknife (7.62 - 17.78 mm, up to 23.8 mm) |
| Reel |
11-blade, using greens mower section; 8-blade, using fairway mower section |
| Reel Speed |
Approximately 2,000 rpm |
| Rear Roller |
2.187" (50.8 mm) diameter, heavy-duty smooth (shortened to minimize overlap striping); roller scraper standard |
| Front Roller Options |
3" (76.2 mm) diameter, grooved steel roller; 2.187" (50.8 mm) diameter groomer-type, grooved front rollers; 2.187" (50.8 mm) diameter smooth front roller |
|
|
 |
|
|
