|
Home > Products > Fairway
Mowers > LF-4677™ |
|
 |
 |
 |
 |
 |
 |
LF-4675™ / LF-4677™
- One-Touch Reel Control - Simple-to-use joystick delivers precise control of reel operation.
- 139" Width of Cut - Mower delivers the highest productivity in the market.
- Greens Care Biodegradable Hydraulic Fluid - Environmentally friendly.
- Electronic Control Module - Provides on-board diagnostic testing of electrical system.
- FlashAttach™ Reel Mounting System - Quick-detach reels provide easy and fast service.
|
 |
 |
|
|
|
|
| LF-4675™ / LF-4677™ |
| Engine |
Kubota® V1505TE 4-cycle, 4-cylinder, turbocharged, liquid-cooled, low emissions-certified diesel |
| Horsepower |
44.2 (32.9 kW) |
| Air Cleaner |
Donaldson dry-cartridge type with evacuator valve and service indicator |
| Cooling |
Pressurized 8 qt. (7.6 L) capacity, 15.75 in. (40 cm) 8-blade fan |
| Lubrication |
Full-flow oil filter |
| Oil Filter |
Replaceable, spin-on type |
| Electrical System |
12V starter; 40-amp alternator/regulator |
|
|
|
 |
|
|
|
|
| LF-4675™ / LF-4677™ |
| |
| VEHICLE |
| Traction Drive |
Variable-displacement, servo-controlled hydrostatic drive; high-torque wheel motors; on-demand, electrically controlled hydraulic 4WD valve, 4-section pump and direct coupled reel motors, each equipped with built-in relief |
| Hydraulic System |
14 gal. (37.85 L) capacity; hydraulic oil monitor and horn alarm; large-volume hydraulic oil cooler with full-flow, 10-micron filter Greens Care biodegradable hydraulic fluid |
| Mower Lift |
Joystick control; one-touch lift/lower 5/6/7-gang control |
| Steering |
Hydrostatic, rear-wheel power |
| Fuel Tank |
17 gal. (63.34 L) |
| |
| Tires |
| Front |
(2) 26.5 x 14.0 - 12 tubeless |
| Rear |
(2) 20.0 x 10.0 - 8 tubeless |
| |
| Brakes |
| Service |
Dynamic braking through traction circuit |
| Parking |
9.25 in. (23.5 cm) disc on front wheels |
| |
| Ground Speed |
| Forward |
0 - 12 mph (0 - 19.3 km/h) |
| 4WD Forward |
0 - 7.5 mph (0 - 12.1 km/h) |
| Reverse |
0 - 5 mph (0 - 8.1 km/h) |
| Mow Speed |
0 - 7 mph (0-11 km/h) |
| |
| |
| DIMENSIONS |
| Length (catchers off) |
108 in. (2.74 m) |
| Height (without O.P.S.) |
58.75 in. (1.49 m) |
| |
| Width |
| Mow Position |
155 in. (3.93 m) |
| Transport Position |
87 in. (2.2 m) |
| |
| |
| OVERALL WEIGHT |
| LF-4675™ |
3,180 lbs. (1,442 kg) |
| LF-4677™ |
3,450 lbs. (1,565 kg) |
| |
|
| NOTE: Specifications, while correct at time of printing, may change without notice. This product has been tested and complies with B71.4-2004 ANSI voluntary safety specifications for commercial turf equipment. |
|
|
|
|
 |
|
|
| |
| Reel Number, Size and Speed |
LF-4675™: (7) 5 in. dia. x 22 in. (12.7 x 55.9 cm); 2,040 rpm |
| LF-4677™: (7) 7 in. dia. x 22 in.(17.8 x 55.9 cm); 1,480 rpm |
| Blades and Cutting Frequency |
LF-4675™: 7 heavy section fairway blades, 0.074 in./mph (1.88 mm/km/h) |
| LF-4677™:11 heavy-section fairway blades, 0.065 in./mph (1.65 mm/km/h)
and 9 heavy-section fairway blades, 0.079 in./mph (2.02 mm/km/h) |
| Cutting Width |
139 in. (3.53 m) |
| Height of Cut |
0.375 in. - 1.125 in. (9.5 - 28.5 mm) |
|
|
|
|
|
 |
|
|
LF-4675™
- 7-blade, 5" Diameter Flash-Attach™ Reel, 2" Heavy Duty Rear Roller with Scraper and 3" Grooved Steel Front Roller with Scraper. Less Hydraulic Motor (7 required)
- Powered Rear Roller Cleaning Brush (7 Required)
- 1.187" Height of Cut Assembly with Rear Roller Scraper Rod (No Rollers Included) (7 Required)
- 22" Rear Throw Shield (7 Required)
- 5" Diameter FlashAttach™ Vertical Mower Assembly, .75" Spacing, Front and Rear Rollers and Lift Yoke included. Less Motors (7 Required)
LF-4677™:
- 11-blade, 7" Diameter Heavy-Duty Reel, Heavy Duty 2.5"
Rear Roller with Scraper and 3" Grooved Steel Front Roller
with Scraper. Less Hydraulic Motor (7 Required)
- 9-blade, 7" Diameter Heavy-Duty Reel, Heavy-Duty 2.5"
Rear Roller with Scraper and 3" Grooved Steel Front Roller
with Scraper. Less Hydraulic Motor (7 Required)
- Powered Rear Roller Cleaning Brush (7 Required)
- 7" Diameter FlashAttach™ Vertical Mower Assembly
(7 Required), 1" Spacing, Front and Rear Rollers Included.
Less Motors and Lift Yokes
- 1.562" Hi-Cut Kit (7 Required)
- Grass Catcher Mounting Hardware Kit, Required to Mount LF-4677 Grass Catcher (4 Required)
LF-4675™ / LF-4677™:
- 2-Post O.P.S. (Replaces 2-Post R.O.P.S. with Seatbelt)
- Canopy/Sunshade (2-Post O.P.S. Required for Mounting)
- Grass Catcher, (7 Required) - Catcher Mounting Hardware
Kit Required for LF-4677
- Transport Lock Bars (Required for CE Approval)
- Hood Locking Latch (Required for CE Approval)
|
|
 |
|
 |
